程序系統工程研究室
Process Systems Engineering Laboratory (PSE)
吳哲夫教授 研究室成員
趙怡雯
碩士班二年級
r11524060@ntu.edu.tw
r11524060@ntu.edu.tw
研究主題:
塑膠裂解製程之設計
博士畢業生與學位論文 Doctoral Graduate and Dissertation
潘晧人 Hao-Jen Pan (2022)。求解批次結晶製程最適化問題之高效能近似解析演算法 Nearly Analytical and Computationally Efficient Algorithms for Optimization of Batch Crystallization Processes。https://hdl.handle.net/11296/nh4r49
王馨右 Hsing-Yu Wang (2016)。結晶程序之設計、控制、最適化與經濟分析 Design, control, optimization, and economic analysis of crystallization processes。https://hdl.handle.net/11296/xcr545
曾郁迪 Yu-Ti Tseng (2015)。批次結晶程序之最適化及晶種策略 Optimization and seeding strategy in batch crystallization processes。https://hdl.handle.net/11296/gykj8p
高玉龍 Yu-Lung Kao (2015)。包含不純物收集之批次反應蒸餾系統的設計、操作與最適化 Design, Operation and Optimization of Batch Reactive Distillation with Off-Cut。https://hdl.handle.net/11296/rd72gk
蘇乾元 Chien-Yuan Su (2013)。乳酸純化製程之反應蒸餾系統設計與最適流程控制 Plant-wide Design and Control of Lactic acid Recovery Processes by Reactive Distillation with Different Alcohols。https://hdl.handle.net/11296/c5s82m
程建凱 Jian-Kai Cheng (2010)。利用最適化演算法與捷徑法進行反應蒸餾塔的設計 Design of Reactive Distillation Process via Rigorous Optimization and Shortcut Methods。https://hdl.handle.net/11296/364tps
碩士畢業生與學位論文 Master Graduate and Thesis
簡至寬 Chih-Kuan Chien (2023)。用於萃取蒸餾塔序列節能技術之比較 Comparison of alternative energy-saving strategies for extractive distillation processes。https://hdl.handle.net/11296/56pxup
簡瑋廷 Wei-Ting Chien (2023)。考量初級成核之晶種與非晶種批次結晶製程之最適化 Optimization of Seeded and Unseeded Batch Crystallization Processes with Primary Nucleation。https://hdl.handle.net/11296/9zp5vt
高衡山 Heng-Shan Kao (2023)。使用類神經網路與理論模型對聚合物的預測及控制 Prediction and Control of Polymers with Artificial Neural Network and Theoretical Model。https://hdl.handle.net/11296/3r8aqw
劉宇浩 Takorn Plengsangsri (2023)。PBS 反應器之類神經網路模擬與模型預測控制器設計 The Simulation of a Polybutylene Succinate (PBS) Reactor with a Neural Network Model Based Predictive Controller。https://hdl.handle.net/11296/tt974h
李翌玄 I-Hsuan Lee (2022)。船上引擎廢氣之脫硫及脫碳處理 Marine exhaust gas treatment for SOx abatement and carbon capture。https://ndltd.ncl.edu.tw/cgi-bin/gs32/gsweb.cgi?o=dnclcdr&s=id=%22111NTU05063001%22.&searchmode=basic
唐偉庭 Wei-Ting Tang (2021)。三元無共沸蒸餾系統之熱整合複雜蒸餾塔序列 Stacked complex sequences for ternary zeotropic distillation。https://hdl.handle.net/11296/65yq2e
顏展生 Chan-Shen Gan (2021)。蒸汽再壓縮熱泵在蒸餾塔和蒸餾塔序列的應用 Application of vapor recompression heat pumps in distillation columns and column sequences。https://hdl.handle.net/11296/89z2zp
方鈺鳳 Yu-Feng Fang (2020)。運用嚴謹程序模型進行混合共沸劑之萃取蒸餾的程序最優化 Optimal Design of Extractive Distillation with Mixed Entrainer Using Rigorous Process Models。https://hdl.handle.net/11296/4em54p
錢若宇 Jo-Yu Chien (2020)。利用Aspen Plus自動化伺服器與模擬退火演算法進行反應蒸餾及挾帶劑增強反應蒸餾之最佳化 Optimization of Reactive Distillation and Entrainer-Enhanced Reactive Distillation using the Aspen Plus Automation Server and a Simulated Annealing Algorithm。https://hdl.handle.net/11296/gx6wq3
蔡德諭 Te-Yu Tsai (2019)。自動塔序列最適化於勻相共沸混合物 Automatic Column Sequencing and Optimization for Homogeneous Azeotropic Mixtures。https://hdl.handle.net/11296/ys74q7
林煒恩 Wei-En Lin (2019)。利用嚴謹模擬、隨機最適化與蒸餾塔熱整合辨別最適分離程序 Regions of Optimality for Separation System Synthesis Using Rigorous Modeling, Stochastic Optimization and Column Stacking。https://hdl.handle.net/11296/eczxkw
張庭 Ting Chang (2019)。藉由海水洗滌去除海上機具廢氣之模擬 Modeling of Seawater Scrubbing for Exhaust Gas Cleaning in Marine Applications。https://hdl.handle.net/11296/ys2fn9
侯昕妤 Hsin-Yu Hou (2018)。利用模擬退火演算法和Aspen Plus ActiveX自動化伺服器進行使用混合溶劑之萃取蒸餾塔最適化 Extractive Distillation Optimization with Mixed Entrainer Using Simulated Annealing Algorithm and Aspen Plus Automation Server。https://hdl.handle.net/11296/75f7m4
林瑋萱 Wei-hsuan Lin (2018)。利用程序模擬自動化伺服器設計熱整合變壓蒸餾系統 Design of Heat-Integrated Pressure Swing Distillation Processes using a Process Simulation Automation Server。https://hdl.handle.net/11296/ysy9t6
黃品勛 Pin-Hsun Huang (2018)。利用新捷徑方法計算隔牆塔之設計參數並以模擬退火法最適化 Shortcut Design of Divided Wall Columns and Optimization Using Simulated Annealing Algorithm。https://hdl.handle.net/11296/y54kcz
施咸圳 Sian-Jyun Shih (2018)。動態模擬液化天然氣接收站 Dynamic model of an LNG receiving terminal。https://hdl.handle.net/11296/4n4gnv
蘇柏丞 Po-Chen Su (2017)。薄膜輔助結晶之操作與動力式模擬 Operation and Kinetic Modeling of Membrane-assisted Crystallization。https://hdl.handle.net/11296/789h5b
吳冠霖 Kwan-Ling Wu (2017)。不同化學產品的結晶技術經濟評估比較 Economic comparison of crystallization technologies for different chemical products。https://hdl.handle.net/11296/4u3v6k
李哲安 Che-An Lee (2017)。硝酸鉀之共熔冷卻批式結晶程序模擬 Modeling and Simulation of a Potassium Nitrate Batch Eutectic Freeze Crystallization Process。https://hdl.handle.net/11296/n34fzq
楊曉玲 Xiao-Ling Yang (2016)。利用Aspen Plus ActiveX自動化伺服器進行萃取蒸餾塔的最適化 Extractive Distillation Optimization by Using Aspen Plus ActiveX Automation Server。https://hdl.handle.net/11296/s5q53q
倪沅煒 Yuan-Wei Ni (2016)。利用Aspen Plus ActiveX自動化伺服器進行塔序列、整合與整廠最適化 Column Sequencing, Stacking and Plantwide Optimization Using Aspen Plus ActiveX Automation Server。https://hdl.handle.net/11296/4zh5q7
吳軒宇 Hsuan-Yu Wu (2016)。利用長晶模型設計顆粒流體化床反應器 Fluidized bed pellet reactor based on particle growth models。https://hdl.handle.net/11296/e7zac9
謝翔峰 Hsiang-Feng Hsieh (2015)。最佳化批次結晶程序之操作與限制分析 Optimization of batch crystallization with constraints。https://hdl.handle.net/11296/enfv2t
卓竑志 Hung-Chih Cho (2015)。己二酸晶種式批次結晶槽之模擬、操作及最適化 Modeling, Operation and Optimization of Experimental Seeded Batch Crystallization of Adipic Acid。https://hdl.handle.net/11296/jm5yws
陳柏彣 Bo-Wen Chen (2015)。硫酸鉀鋁批次結晶槽和長晶動力式模擬與最適化操作 Kinetics modeling and optimized operation in batch seeded crystallization of potassium aluminum sulfate。https://hdl.handle.net/11296/2gb4hs
黃姿瑜 Tzu-Yu Huang (2014)。糠醛轉換為呋喃的程序最適化設計和控制 Optimal Design and Control of a Process to Produce Furan from Furfural。https://hdl.handle.net/11296/7n3p6x
李柏賢 Po-Hsien Lee (2014)。利用半批次反應蒸餾生產乙酸異丙酯與乙酸乙酯製程之最適化 The Optimization of Semi-batch Reactive Distillation for Isopropyl Acetate and Ethyl Acetate and Ethyl Acetate Synthesis。https://hdl.handle.net/11296/k642h7
王瑋鈞 Wei-Jyun Wang (2013)。三種類型內隔壁式蒸餾塔之動態控制 Control of three types of dividing-wall columns。https://hdl.handle.net/11296/7tnf3e
吳則賢 Tse-Hsien Wu (2012)。晶種式批次結晶槽之模擬,操作與最佳化 Modeling, operation and optimization of an experimental seeded batch cooling crystallizer。https://hdl.handle.net/11296/z23kj9
徐立文 Li-Wen Hsu (2012)。利用半批次反應萃取蒸餾生產不同醇類與乙酸在酯化反應下的產物 Semi-batch Reactive Extractive Distillation for Production of Acetic Acid Esters with Different Alcohols。https://hdl.handle.net/11296/fr2pyf
丁偉倫 Wei-Lun Ting (2011)。晶種式批次結晶程序之最適化─考慮晶種成長與粒徑相關之情況 The optimization of seeded batch crystallization when growth rate is size-dependent。https://hdl.handle.net/11296/nvfnen
江紹群 Shaw-Chun Chiang (2011)。批次結晶程序之動力模型彙整及分析 Compilation and Analysis of Batch Crystallization Kinetics。https://hdl.handle.net/11296/td8a9n
茆騰允 Teng-Yun Mao (2011)。內隔壁式蒸餾塔應用於非理想系統之穩態設計 Steady State Design of Non-ideal Divided Wall Column systems。https://hdl.handle.net/11296/n9s7u7
趙傳真 Chuan-Chen Chao (2010)。內隔壁式蒸餾塔之動態與控制 Dynamics and Control of Divided Wall Columns。https://hdl.handle.net/11296/52b35u
許哲維 Che-Wei Hsu (2010)。最佳化批次結晶程序之目標函數選擇 Comparison of objective functions for seeded batch crystallization。https://hdl.handle.net/11296/7yazcg
曾郁迪 Yu-Ti Tseng (2010)。批次結晶程序整體設計之發展 Development of recipes for seeded batch crystallization。https://hdl.handle.net/11296/2fyy9d
鄭雅玲 Ya-Ling Cheng (2009)。硼氫化鈉水解產氫系統之設計與控制 Design and Control of a Hydrogen Generation System using the Sodium Borohydride Hydrolysis Reaction。https://hdl.handle.net/11296/c5kg8b
高玉龍 Yu-Lung Kao (2009)。不同相對揮發度排序對批次反應性蒸餾系統設計與操作的影響 Effect of Relative Volatility Ranking on the Design and Operation of Batch Reactive Distillation Systems。https://hdl.handle.net/11296/d63dyz
聖安同 Anton Santoso (2009)。利用混合式薄膜蒸餾系統對共沸組成混合物分離之設計與控制 Design and Control of Hybrid Distillation-Membrane Systems for Separating Azeotropic Mixtures。https://hdl.handle.net/11296/uwvk4r
朱愷悌 Kai-Ti Chu (2009)。內隔壁式蒸餾塔之穩態設計與經濟效應分析 Steady State Design and Economic Analysis of Divided Wall Columns。https://hdl.handle.net/11296/85tupx